Christie D13HD2-HS Laser Projector
Christie D13HD2-HS 13,000 lumen, HD, 1DLP laser projector 171-013105-XX

Purchase New

Nationwide now offers new equipment sales. Get a quote with this selection.

Enjoy the performance of advanced electronics. With 13,000 lumens, the Christie® D13HD2-HS is equipped with advanced 1DLP® laser projection technology to operate at full-brightness on a single 15A, 110V circuit. There’s no need for high-power runs. Simply plug into a standard outlet and start the show!

Visuals are stunning thanks to the enhanced color accuracy of Christie’s BoldColor™ Technology and HD resolution. The long-lasting and reliable laser light source and affordability of 1DLP technology means the D13HD2-HS is a cost-effective option for high-use applications. Featuring the built-in Christie Twist™ warping and blending engine, and compatible with Christie Mystique® automated camera-based alignment solutions, the D13HD2-HS gives you the tools you need to quickly and easily set up, align, and maintain irregular screens and multi-projector displays.

Key features

  • Christie BoldColor Technology – Enhanced color performance and saturation over standard laser projection
  • Long-life laser light source – Up to 20,000 hours to 50% brightness of virtually maintenance-free operation
  • Warp and blend – Built-in Christie Twist for quick and easy setup of multi-projector displays
  • Compatible with Christie Mystique – Automated camera-based alignment solutions that eliminate the challenges, time and expertise required to align, stack, warp and blend complex multi-projector arrays and projection mapping experiences
  • Fully omnidirectional – Unrestricted design and installation flexibility
  • Lens compatibility – Designed to work with all Christie HS Series lenses for added cost-savings and versatility
  • Comprehensive connectivity – Full connectivity for popular formats including 3GSDI for added redundancies
  • Christie Virtual Remote 1DL – Gives you wireless control from any smartphone or tablet
  • Advanced electronics – Firmware updates take only minutes
  • TAA Compliant

Additional information

ISO lumens 13,000
ANSI lumens 11,500
Contrast ratio Full On/Off (Christie Real Black enabled): 750,000:1 , Full On/Off (Christie Real Black disabled): 1,200:1
Dynamic contrast 6,000:1
Display type 1 x 0.95" DMD
Resolution HD (1920 x 1080)
Illumination type Laser phosphor with Christie BoldColor Technology
Illumination performance (hrs) 20,000
Scan rates Horizontal: 15-91kHz Vertical: 24-85Hz
Pixel clock rate 162 MHz
Signal Input - HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable) - 3GSDI (BNC) - DVI-D (digital only) - HD15 - USB (type A) - (WiFi dongle optional) - HDBaseT (RJ45) - RJ45 (ChristiePresenter over wired network connection) 3D Inputs - HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side 1920 x 1080 at 120Hz output - 3D Sync In (BNC) - for genlocking projectors - 3D Sync Out (BNC) - for genlocking projectors or controlling emitters - Horizontal and vertical scaling while maintaining aspect ratio, all inputs
Signal output - 3GSDI (BNC) - DVI-D (digital only)
Control & networking - RS232 In - Control via HDBaseT - Ethernet (10/100) RJ45 - Built-in backlit keypad - Wired remote control (3.5mm stereo) - loop out available for daisy chaining - 12VDC trigger at 200mA (ID:2.5mm)
Lens mount - Boresight adjustable - Motorized horizontal and vertical lens offset (memory available) - Motorized zoom and focus adjustment (memory available for full ILS lenses)
Lens options Lenses: 0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens 1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens 1.2-1.5:1 zoom lens (full ILS) 1.5-2.0:1 zoom lens (full ILS) 2.0-4.0:1 zoom lens (full ILS) 4.0-7.0:1 zoom lens (full ILS) Offsets (Full ILS lenses) : +/- 133% vertical (+/- 720 pixels) +/- 50% horizontal (+/- 480 pixels) +/- 50% horizontal (+/- 480 pixels) +110 / -86% vertical (+596/-466 pixels) +34 / -39% horizontal (+330/-376 pixels) Offsets 1.02-1.36:1 +125 / -98 % vertical (+676/-534 pixels) +42 / -47% horizontal (+408/-457 pixels)
Power requirements Operating voltage: - Normal: 120-240VAC @ 60/50 Hz with 15A fuse Power consumption: - Normal mode: 1220W +/-15% (220V), 1300W +/-15% (100V) - ECO1 mode: 1000W +/-15% (220V), 1050W +/-15%(100V) - ECO1 mode: 1000W +/-15% (220V), 1050W +/-15%(100V) Operating current: - Normal mode: 7A (200-240VAC), 14A (100-120VAC)
Dissipation - Normal mode: 4435 BTU/hr - Normal mode: 4435 BTU/hr - ECO2 mode: 2390 BTU/hr
Audible noise - Typical: 39dBA - Eco mode: 37dBA
Dimensions (LxWxH) 26.65 x 23.46 x 7.99" without feet 677 x 596 x 203mm without feet Shipping dimensions: 36.34 x 33.19 x 20.20" 923 x 843 x 513mm
Weight - 93.7 lb (42.5 kg) - Shipping weight: 119 lb (54 kg)
Operating environment - Temp: 0 to 40° C (32 to 104° F) - Humidity: 0 - 85% non-condensing
Regulatory - Contact Christie for the timing of certifications: - UL/CSA/IEC 60950-1 FCC Class A CE FDA CCC KC PSE CU BIS VCCI RCM TER - This product conforms to all relevant European directives, standards, safety, health and environmental concerns - RoHS REACH WEEE
Limited Warranty - Three years parts and labor on the projector - Three years or 20,000 hours parts and labor on the illumination system* - Contact an authorized Christie representative for full details of our limited warranty - *Please reference the Christie Standard Limited Warranty document for details.
Accessories (standard) Standard: - IR remote w/ wired remote jack (wire not included) - AC line cords for projector head - User manual Optional: - 1DWUSB-BGN (wireless dongle for video and control) - HS fog filter covers + filters (order once per projector then only filters refills) - HS fog filter refills (1 set) - Replacement remote control

recently viewed gear

You have not viewed any product yet!

ACCESS PRO EXPERTISE. ALL DAY. EVERY DAY.

LET'S TALK IT OUT

I hate talking to people.

I like it old school.

Get together. Get it right.

let's talk by email

let's talk by phone

let's talk on Zoom