Combining SD, HD, and 3G test pattern generation with capabilities usually reserved for a computer controlled scaler/converter the DECIMATOR MD-Cross V2 Miniature HDMI/SDI Cross Converter is a small independent device that features both an HDMI and a 3G-SDI input, and can cross convert either signal to the other. It features a built-in scaler and frame rate converter as well, allowing you to convert the input signal to your required output standard. The included test pattern generator of the MD-Cross supports 26 selectable output formats with 54 test patterns. It features one HDMI output, one loop through SDI output, and two pairs of 3G-SDI outputs, controllable via fourteen selectable conversion modes, providing you with a variety of modes to fit your needs. This converter does not require a computer or DIP switches to control as it incorporates a small LCD screen for menu functions, and four buttons for control. It comes with a power supply with locking power cable to prevent accidental power loss during use.
|Inputs||HDMI: 1 x Type A
SD/HD.3G-SDI: 1 x BNC
SD/HD.3G-SDI: 3 x BNC (1 x Active Loop-Through, 2 x output)
|SDI Formats Supported||3G: SMPTE 424M 2.97 and 2.967 Gb/s
1080p: 60/59.94/50 HzHD: SMPTE 292M/274M/296M 1.485 and 1.435 Gb/s
1080i: 60/59.94/50 Hz
1080p/psf: 30/29.97/25/24/23.98 Hz
720p: 60/59.94/50/30/29.97/25/24/23.98 Hz
SD: SMPTE 259M 270 Mb/s
|Power||5 to 32 VDC
|Dimensions||3.1 x 4.8 x 1.2″ / 79.5 x 123 x 29.5 mm|
recently viewed gear
ACCESS PRO EXPERTISE. ALL DAY. EVERY DAY.
LET'S TALK IT OUT
let's talk by email
I hate talking to people.
let's talk by phone
I like it old school.
let's talk on Zoom
Get together. Get it right.