Magewell SDI AV Capture Kit
The Magewell SDI AV Capture Kit is a one-channel HD capture device that captures SD/HD/3G/2K SDI + embeds audio. Now available from Nationwide Video.
The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0. It features loop-through BNC input/output that allows you to see your video on a downstream device, while you are capturing it into your computer. It also has a line-in audio input, for capturing audio directly, without picture, or you can de-embed the audio from the SDI stream.
Key Components: Magewell USB Capture SDI Plus, Shure MXV2U
Video Processing
- Video processing pipelines with 160MP processing bandwidth
- Video cropping
- Video scaling
- Video de-interlacing
- Weave
- Blend top & bottom field
- Top field only
- Bottom field only
- Video aspect-ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect-ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)
- Video color-format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame-rate conversion
- Vertical flip and mirror
Additional information
| Supported OS | Windows: 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux: (Ubuntu 12.04-16.10, CentOS 7) OS X: 10.9-10.11 macOS: 10.12 Chrome OS |
|---|---|
| Supported APIs | Windows DirectShow Wave API/DirectSound/WASAPI Linux V4L2 ALSA OS X/macOS QuickTime AV Foundation |
| Supported Software | VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any Other DirectShow, V4L2, QuickTime, AV Foundation Based Encoding, or Streaming Software |
| Input Interface | SD/HD/3G-SDI: 1 x BNC Unbalanced Line-In: 3.5 mm Jack |
| Output Interface | Loop-Through: 1 x BNC Unbalanced Line-Out: 3.5 mm Jack |
| Host Interface | USB 3.0: Compatible with USB 2.0/3.1 |
| Input | Resolution Supports up to 2048 x 1080 SDI Specific Features Integrated Cable Equalizer Supporting Cable Lengths up to 459' / 140 Meters for 3G-SDI Signals Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS Standards Support for 2K (2048×1080) Mode Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 Color Sampling Support for 10/12-bit Color Depth Support for extraction of SMPTE 352 Payload Identifier Support for up to 2 (Mono) Audio Channels at 48 kHz Support for Extraction of Audio Formation Information & Channel Status Data Limited Support of 3Gb-DS: Only the First Stream Can Be Captured Limited Support for Capture of the First Link of Dual-Link Interfaces: YCbCr 4:2:2 10-Bit 1080p 50/59.94/60: Captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-Bit: Captured as 4:2:2 RGB 4:4:4: R/B Sub-Sampled |
| Analog Audio | Extract the Embedded SDI Audio and Output via 3.5 mm Unbalanced Line Out Capture Analog Audio via 3.5 mm Unbalanced Line-In Interface |
| Video Capture Format | Support for Capture Resolutions up to 2048×1080 Support for Capture Frame Rates up to 120 fps (Actual Capture Frame Rate Can Be Limited by the USB Bandwidth and Internal Working Frequency. Typical Capture Frame Rates on the Intel USB 3.0 Controller are as Follows:) 1920×1080 YUY2 (up to 70 fps) 1920×1080 RGB24 (up to 60 fps) Support for YUY2 & UYVY4:2:2 8-Bit Support for RGB24 & RGB32 4:4:4 8-Bit The Default Capture Format Is YUY2 More Capture Format Can Be Set Using USB Capture Utility |
| Power Consumption | 5 V Max Current: ~0.5 A Max Power Consumption: ~2.5 W |
| Environment | Operating Temperature: 32 to 122°F / 0 to 50°C Storage Temperature: -4 to 158°F / -20 to 70°C Relative Humidity: 5 to 90% Non-Condensing |
| Dimensions | 4.36" x 2.24" x 0.67" |
recently viewed gear
You have not viewed any product yet!